A tight seal that protects the product
A complete seal line around the rim stops leaks and keeps air out, which is what holds the shelf life you print on the pack.
Exclusive Agent & Authorized Distributor for ATRUM MAKINA Thermoforming Machines across the GCC
A tight lid seal for every container shape — from tens to hundreds per minute
Your pre-made containers go in as they are and come out sealed tight — and format tooling is what lets one machine serve more than one shape.
What this machine gives your factory
Flexibility across shapes
Format tooling per container shape means you do not buy a new machine every time you add a product in a different pack.
High output in a reasonable footprint
Multiple cavities raise the per-minute count without the line stretching indefinitely.
Applications
How it works
The machine indexes pre-made containers linearly — or moves them continuously depending on model — to a sealing station with a temperature-controlled head, which seals either pre-cut foil or roll-stock film with optical registration and cuts it to the container's shape. Multiple cavities are what raise output, because each cycle closes more than one container.
Technical specifications
| Output | a wide range from around 10 up to around 750 containers/minute depending on model and configuration |
|---|---|
| Cavities | set by configuration and target output |
| Lid material | pre-cut foil or roll-stock |
| Temperature control | temperature-controlled sealing head |
| Structure | stainless steel |
| Control | PLC with HMI screen |
| Power | Configured for the Saudi grid, 380V / 60Hz — confirmed per model before ordering |
Exclusive Agent & Authorized Distributor for ATRUM MAKINA Thermoforming Machines across the GCC — factory-direct pricing, with local installation and support.
Frequently asked questions
Pre-cut foil or roll-stock?
Roll-stock is cheaper at volume because it is cut to the container shape during the run; pre-cut foil is simpler for lower quantities.
Does it serve multiple container shapes?
Yes — with format tooling per shape, which we specify with you based on your current and planned containers.
What output should we expect?
Anywhere from around 10 to around 750 containers per minute depending on model and cavity count — we pin it down once we know your daily target.
Will it work on our factory's power?
We review your site specification and confirm 380V / 60Hz compatibility before you order.
What container shapes do you run, and how many per minute?
Send us the container dimensions and target output, and we will specify the cavities and format tooling.
Ask on WhatsApp